LG LT700P vs LT800P vs LT1000P: Which LG Refrigerator Filter Do You Need?

Quick answer: Three LG generations, three cartridges. LT700P fits most LG French-door fridges from roughly 2010 to 2018 (twist-in, upper interior, also sold as Kenmore 9690). LT1000P fits 2018+ models including InstaView and Door-in-Door (push-in, also sold as Kenmore 9980). LT800P fits bottom-freezer models with the filter in the lower grille (Kenmore 9490). They are not interchangeable: picking the wrong one means a cartridge that will not lock, or a leak.

The LG family decision chart

LG names are close enough to cause expensive mistakes, so start with the two questions that settle it in 30 seconds: where is your filter, and what year is your fridge?

Filter location Fridge era Your filter Kenmore equivalent
Upper-right interior, twist-in 2010 to 2018 LT700P Kenmore 9690
Upper-right interior, push-in 2018 onward, InstaView, Door-in-Door LT1000P Kenmore 9980
Lower-left grille, push-button Bottom-freezer models LT800P Kenmore 9490
Older side-by-side, twist-in 12+ years old LT500P Legacy models

Why Kenmore owners land on this page

Many Kenmore and Kenmore Elite refrigerators were manufactured by LG. If your Kenmore model number starts with 795, it is LG-built and takes LG cartridges under a Kenmore label. The mapping is one-to-one: Kenmore 9690 is the LT700P, Kenmore 9980 is the LT1000P, and Kenmore 9490 is the LT800P. Either label fits the same housing.

The ADQ cross-reference

LG prints an ADQ engineering number on the cartridge itself, alongside or instead of the LT name. If that is all you can read on your old filter, translate it here:

ADQ number on the cartridge Filter to order
ADQ36006101, ADQ36006102 LT700P
ADQ73613401, ADQ73613408 LT800P
ADQ74793501, ADQ74793504, ADQ747935 LT1000P
5231JA2002A LT500P

What happens if you pick the wrong one

The LT700P and LT1000P look similar at a glance but use different mounting systems: twist-in for the LT700P, push-in with a quarter-turn lock for the LT1000P. A mismatched cartridge either refuses to seat, or seats partially and leaks inside the compartment once water pressure hits the housing. Always confirm against the label on the cartridge you are removing, not just the fridge’s age.

Certifications compared

  • LT700P: NSF/ANSI 42 and 53. Chlorine taste and odor, lead, cysts, mercury.
  • LT800P: NSF/ANSI 42 and 53.
  • LT1000P: NSF/ANSI 42, 53 and 401. The 401 certification adds pharmaceuticals, BPA and other emerging contaminants, which makes it the strongest certification stack of the three.

All three are rated for 200 gallons or 6 months, whichever comes first.

Order your LG or Kenmore filter with free US shipping

Frequently asked questions

My Kenmore model starts with 795. Which filter do I buy?

A 795 prefix means your Kenmore was built by LG. Check the cartridge label: it will carry a Kenmore number (9690, 9490, 9980) or an LG LT or ADQ number. Use the tables above to translate, then order either label version.

Is the LT1000PC different from the LT1000P?

No. LT1000P, LT1000PC and LT1000PCS are the same cartridge sold through different retail channels. Any of them fits any LT1000P housing.

Can I force an LT700P into an LT1000P housing?

No, and trying can crack the housing. The mounting systems are different by design. If your cartridge does not seat with light pressure and a smooth quarter turn, it is the wrong filter, not a stubborn one.

Which of the three should I buy if I want the strongest filtration?

You do not get to choose between them: each fits a different housing. The filter your fridge was designed for is the only one that fits. What you can choose is certification level within that model’s options, and among the three families only the LT1000P carries NSF/ANSI 401 on top of 42 and 53.

Leave a Reply

Your email address will not be published. Required fields are marked *

Verified by MonsterInsights