Genuine Whirlpool refrigerator water filters
Whirlpool sells its refrigerator water filters under the everydrop name. Every everydrop cartridge we carry is the genuine part, new in its sealed box: Filter 1 (EDR1RXD1), Filter 2 (EDR2RXD1), Filter 3 (EDR3RXD1), Filter 4 (EDR4RXD1), Filter 5 (EDR5RXD1), Filter 6 (EDR6D1) and Filter A (EDRARXD1), plus the ICE2 filter (F2WC9I1) for everydrop ice machines.
Whirlpool also builds Maytag, KitchenAid, Amana and JennAir refrigerators, and they take the same everydrop filters. If your refrigerator carries one of those names, the right filter is on this page.
Which everydrop filter does my refrigerator take?
The everydrop number depends on the shape of the cartridge and where it sits in your refrigerator, not on the brand on the door. Three quick ways to find yours:
- Read your old filter. The everydrop number or an older Whirlpool part number such as W10295370A, UKF8001 or 4396508 is printed on the label. The cross-reference table above shows which current filter replaces each old number.
- Look up your refrigerator model. Enter the model number in the finder above: we have matched hundreds of Whirlpool, KitchenAid, Maytag and Amana models to their filter.
- Check the filter compartment or the manual, which usually show the everydrop number.
Some numbers are easy to mix up. Our guides explain the differences: everydrop Filter A vs Filter 1, everydrop Filter 1 vs 3 vs 4 vs 5 and Whirlpool legacy part numbers decoded.
How often to replace a Whirlpool refrigerator water filter
Replace an everydrop refrigerator filter every 6 months. Most everydrop refrigerator filters are rated for 200 gallons, so a household that drinks a lot of filtered water may need a new one sooner, especially when the water flow slows or the ice starts to taste off. The ICE2 ice machine filter lasts 9 months.
After installing a new cartridge, run a few gallons through the dispenser to clear air and loose carbon, then reset the filter light. See how to flush a new refrigerator filter and how to reset the filter light.
Whirlpool water filter questions
Do Maytag, KitchenAid and Amana refrigerators use Whirlpool filters? Yes. These brands are made by Whirlpool and use everydrop filters. Enter your model number in the finder above or match the number printed on your old filter.
Where is the water filter in a Whirlpool refrigerator? It depends on the model: inside the fresh-food compartment (in an upper corner, on the ceiling or behind a cover near the top) or behind the base grille below the doors. The shape and location of the cartridge tell you which everydrop number you need.
How do I change the water filter on my Whirlpool refrigerator? Most everydrop filters come out with a quarter turn or a push button, and the new one goes in the same way until it locks. Run a few gallons through the dispenser before you drink the water, then reset the filter light.
Can I use my Whirlpool refrigerator without a water filter? Some models dispense water without a cartridge and others need a bypass plug. We do not recommend it: the refrigerator is designed to run with a filter in place, and the filter is what improves the taste of the water and ice.
Are your everydrop filters genuine? Yes. Every filter we sell is the genuine everydrop part, sourced through established US wholesale distributors and shipped new in its sealed packaging. If it does not fit your refrigerator, we refund it and pay the return shipping. See our genuine parts guarantee.