May 9, 2026
GE MWF vs XWFE vs MSWF vs GSWF: the complete GE refrigerator filter guide

GE refrigerators are among the most popular in American homes, and so are their water filters
The challenge: GE has produced four distinct filter models over the years, and they are not interchangeable. Ordering the wrong one means waiting for a return and reorder. This guide makes it simple.
GE MWF: the most widely used GE filter
The GE MWF (SmartWater) fits many GE side-by-side and French-door refrigerators. It also replaces part numbers MWFP and MWFA.
- Filter life: 6 months; rated capacity is 170 or 300 gallons depending on the filter (check the label)
- Certification: see the manufacturer’s performance data sheet
- Location: upper-right interior compartment
- Installation: twist counterclockwise to remove, clockwise to install
GE XWFE: the newer chip-enabled filter
The GE XWFE is designed for newer GE refrigerators and replaced the XWF, so it fits refrigerators that used the XWF. It looks like the MWF but contains an embedded RFID chip that communicates with the fridge’s electronics.
- Filter life: 6 months or 170 gallons
- Certification: see the manufacturer’s performance data sheet
- Important: only the genuine GE XWFE chip will be recognized by newer GE models
GE MSWF: for select side-by-side models
The GE MSWF fits a specific range of GE side-by-side refrigerators, typically older models with a bottom-grille filter location.
- Filter life: 6 months or 300 gallons
- Certification: see the manufacturer’s performance data sheet
- Flow rate: 0.9 gpm, one of the fastest-flowing GE filters
GE GSWF: the longest-lasting GE filter
The GE GSWF stands out for its exceptional capacity: 750 gallons per filter. It fits older GE models and is ideal for large households with high water consumption.
- Filter life: 6 months or 750 gallons
- Certification: see the manufacturer’s performance data sheet
Quick comparison table
| Model | Capacity | Certification | Typical fridges | Special feature |
|---|---|---|---|---|
| MWF | 170 or 300 gal (check label) | See the manufacturer’s data sheet | Earlier models | Most common GE filter |
| XWFE | 170 gal | See the manufacturer’s data sheet | Newer models (replaced XWF) | RFID chip required |
| MSWF | 300 gal | See the manufacturer’s data sheet | Select models | Fastest flow rate (0.9 gpm) |
| GSWF | 750 gal | See the manufacturer’s data sheet | Older models | Highest capacity |
How to identify your GE filter in 60 seconds
The easiest method: locate the filter in your fridge (upper-right interior or bottom grille), pull it out, and read the part number on the label. It will say MWF, XWFE, MSWF, or GSWF clearly.
Order your GE filter today: free US shipping
Frequently asked questions
Is the GE MWF the same as MWFP or MWFA?
Yes. GE MWF, MWFP, and MWFA are identical filters with different part number labels. Any of the three will fit the same refrigerators.
Can I use a generic filter instead of the GE XWFE?
For GE refrigerators that read the RFID chip, only the genuine GE XWFE works correctly. Generic filters without the built-in RFID chip will trigger a filter error on the control panel.
What is the difference between GE MWF and XWFE?
The MWF fits older GE fridges and has no chip. The XWFE fits newer models (and replaced the XWF) and contains an RFID chip. They are not interchangeable despite similar appearance.
Which GE filter removes the most contaminants?
Compare the certifications on each filter’s performance data sheet. NSF/ANSI 53 covers health contaminants such as lead, and NSF/ANSI 401 adds emerging contaminants such as some pharmaceuticals.