Genuine OEM filters · Free US shipping on every order · Order by 3 pm MT, ships same day · 365-day returns

8 Signs It’s Time to Change Your Refrigerator Water Filter

Whirlpool everydrop EDR1RXD1 Genuine Refrigerator Water Filter (Filter 1)
Genuine Whirlpool everydrop EDR1RXD1 (Filter 1)

Refrigerator water filters lose performance gradually. These signs tell you when a replacement is due, so you can keep the filter within its rated life.

Whirlpool everydrop EDR1RXD1 Genuine Refrigerator Water Filter

The short answer

Replace your refrigerator water filter when the indicator light comes on, when it reaches its rated life (usually 6 months) or rated gallons, or when you notice slower flow, a returning chlorine taste or smell, cloudy ice, or particles in the water. A filter’s certified performance applies only within its rated capacity, so the calendar is the most reliable guide.

8 signs it is time for a new filter

1. The filter indicator light is on

Most refrigerators track time (and on some models, water volume) since the last reset. When the light turns on, the filter has reached the manufacturer’s replacement interval. Replace the filter, then reset the light (usually by holding the Filter or Reset button for about 3 seconds; see your manual).

2. It has been 6 months or more

Most manufacturers rate refrigerator filters for about 6 months or a set number of gallons, whichever comes first. Write the install date on the cartridge so you know when the next change is due.

3. Water flow from the dispenser has slowed

Sediment collected by the filter can reduce flow over time. If flow is slow and the filter is near or past its rated life, replace it. If flow is still slow with a new filter, check that it is fully locked and that the water supply valve is open.

4. The chlorine taste or smell is back

Many refrigerator filters are certified to NSF/ANSI 42 for chlorine taste and odor reduction. When that taste returns, the filter is usually near the end of its life.

5. The water or ice smells musty

A musty or stale smell can come from an old filter or from water sitting in the lines. Replace the filter, flush the dispenser as the manufacturer recommends, and discard the first batch of ice.

6. Ice looks cloudier than usual

Cloudy ice is often caused by trapped air or dissolved minerals rather than the filter. A filter at the end of its life can contribute, so check the install date before looking for other causes.

7. You see particles or carbon specks

A few black specks right after installing a new filter are usually loose carbon and clear after flushing. Particles that appear later can mean the filter is past its rated life or not seated correctly.

8. You moved or your water changed

Harder water or more sediment can shorten a filter’s useful life. If your utility’s water quality report changes, or you move, check the filter more often.

What a refrigerator filter does and does not do

A refrigerator filter reduces only the contaminants listed in its certification, and only within its rated capacity. Check the certification on the manufacturer’s performance data sheet. If you have concerns about your water, read your utility’s water quality report or have your water tested.

Bottom line

Replace your refrigerator filter on schedule, usually every 6 months, and sooner if you notice any of the signs above. Find the right cartridge by brand and model in our refrigerator water filters section, or use our Filter Finder.

Find the right filter in seconds

Search by refrigerator model, filter part number or photo.

Find My Filter